Just finished putting this together.


Used a 10' long x 16" wide blank of UV resistant UHMWPE with approximately a 2' curl at the front. Cut it in the coffin shape, using walnut cross pieces with stainless steel screws. 1/4 rope & had dicecupmaker fashion a leather harness complete with awesome artwork.

Let it snow!!!

quote TuscaroraBorealis: "

Just finished putting this together.



Used a 10' long x 16" wide blank of UV resistant UHMWPE with approximately a 2' curl at the front. Cut it in the coffin shape, using walnut cross pieces with stainless steel screws. 1/4 rope & had dicecupmaker fashion a leather harness complete with awesome artwork.

Let it snow!!!"

Very nice TB! How thick was the blank? Did you have any trouble getting it to curl? Use a heat gun or something or just manpower? I have 10x18 blank, 3/8 thick of the same stuff, just never got around to putting it together last year.

It's was a 1/4 inch blank.

No trouble putting the curl in. This stuff flexes pretty decent. Getting the rope lengths equal on both sides of the curl was the biggest challenge.

Pretty fancy! You probably shouldn't even bring it outdoors!

Looks great, but were is the yoke? haha

The first test run.