Author |
Message Text |
RainGearRight
|
quote TuscaroraBorealis: "
Just finished putting this together.
Used a 10' long x 16" wide blank of UV resistant UHMWPE with approximately a 2' curl at the front. Cut it in the coffin shape, using walnut cross pieces with stainless steel screws. 1/4 rope & had dicecupmaker fashion a leather harness complete with awesome artwork.
Let it snow!!!"
Very nice TB! How thick was the blank? Did you have any trouble getting it to curl? Use a heat gun or something or just manpower? I have 10x18 blank, 3/8 thick of the same stuff, just never got around to putting it together last year.
|
PortageKeeper
|
Pretty fancy! You probably shouldn't even bring it outdoors!
|
1BigPaddle
|
Looks great, but were is the yoke? haha
|
TuscaroraBorealis
|
Just finished putting this together.
Used a 10' long x 16" wide blank of UV resistant UHMWPE with approximately a 2' curl at the front. Cut it in the coffin shape, using walnut cross pieces with stainless steel screws. 1/4 rope & had dicecupmaker fashion a leather harness complete with awesome artwork.
Let it snow!!!
|
TuscaroraBorealis
|
The first test run.
|
TuscaroraBorealis
|
It's was a 1/4 inch blank.
No trouble putting the curl in. This stuff flexes pretty decent. Getting the rope lengths equal on both sides of the curl was the biggest challenge.
|